This Sensorsoft protocol based device is a low cost temperature sensor for monitoring temperature of a remote location from your computer. Now you can measure the temperature of buildings, warehouses, greenhouses, equipment rooms and laboratory experiments, to name a few, all from the comfort of your computer.
Traditional scale thermometers are often awkward to read, can break and spill toxic fluid and must be read at the location where installed. The Sensorsoft Thermometer however is rugged and can be conveniently read from your computer, regardless of where you locate the sensor.
The Sensorsoft Temperature Sensor connects via cable to a serial port on your computer and can be located up to a thousand feet away without the need for a battery or external power adapter. This Sensorsoft device, like all of our sensors, uses our unique Sensorsoft auto discovery protocol that insures a quick and easy installation without set-up or data communication errors.
The ST6105C Sensorsoft Thermometer has an integrated 20 ft cable with DB-9F connector and can be plugged into most computers and device servers.
Our software (sold separately) provides a convenient way to display your temperature readings in Celsius or Fahrenheit, send alerts and record temperature readings in a file while you're away from your computer.
Applications
- Computer & telecommunication rooms
- Prevent damage to living plants
- Prevent frozen water pipes
- Cold Storage - ensure quality of frozen products and matter
- Warehouses
- Buildings
- Inside equipment and machinery
- Quality assurance labs
- Pharmacies
Features
- Connects to any RS232 serial port
- Windows and UNIX software available
- Auto discovery protocol (SSDP) ensures that no setup is required
- 16 bit CRC scheme between computer and Sensorsoft Thermometer ensures reliable readings (SSDP only)
- Locate Sensorsoft Temperature Sensor up to 1000 ft. from computer
- Firmware Version 6.5 forward offers Simple Text Commands for use with an ASCII terminal or script languages
- No power supply required, the Sensorsoft Thermometer is powered from the serial port
ST6105C (v6.7) Specifications (currently shipping)
Measurement/Operating Temperature Range: -40 ºC to +60 ºC (-40 ºF to +140 ºF) with internal sensor (NIST traceable if ordered with certificate)
Precision: 0.5 ºC or 0.1 ºC
Accuracy: +/- 0.5 ºC over 0 ºC to +60 ºC range, +/- 1 ºC over remainder of temperature range
Humidity: < 90% RH (non-condensating)
Maximum measurement rate: One reading every second
Housing Dimensions: 8 cm (3.1") x 4 cm (1.6") x 2 cm (0.8")
Housing Material: Injection molded ABS thermoplastic
Housing Colour: Light gray
Sensor type: Semiconductor
Communications cable: Integrated 6 m (20 ft.) cable with DB-9F (female) mini D-SUB connector
Power source: Port-powered (RTS and or DTR, asserted).
Power supply current drain: 2 mA average, 6 mA maximum when port powered (5V RS232)
Communications Interface: RS232 using TX, RX, RTS, DTR and GND. One device per serial port.
Maximum extension cable length: 305 m (1000 ft.) using recommended cable type. Low capacitance STP (shielded twisted pair) cable or UTP (unshielded twisted pair) cable is recommended.
Firmware Version: 6.7
Communications Protocol: Sensorsoft Device Protocol (SSDP) Version 2.0 and Simple Text Commands Interface (r,m,v).
Error control: 16 bit CRC (cyclic redundancy checking) for detection of communication errors between this device and host (SSDP only).
ST6105C (v5.24) Specifications (no longer shipping)
Measurement/Operating Temperature Range: -40 ºC to +60 ºC (-40 ºF to +140 ºF) with internal sensor (NIST traceable if ordered with certificate)
Precision: 0.5 ºC or 0.1 ºC
Accuracy: +/- 0.5 ºC over 0 ºC to +60 ºC range, +/- 1 ºC over remainder of temperature range
Humidity: < 90% RH (non-condensating)
Maximum measurement rate: One reading every second
Housing Dimensions: 8 cm (3.1") x 4 cm (1.6") x 2 cm (0.8")
Housing Material: Injection molded ABS thermoplastic
Housing Colour: Light gray
Sensor type: Semiconductor
Communications cable: Integrated 6 m (20 ft.) cable with DB-9F (female) mini D-SUB connector
Power source: Port-powered (RTS and or DTR, asserted).
Power supply current drain: 2 mA average, 6 mA maximum when port powered (5V RS232)
Communications Interface: RS232 using TX, RX, RTS, DTR and GND. One device per serial port.
Maximum extension cable length: 305 m (1000 ft.) using recommended cable type. Low capacitance STP (shielded twisted pair) cable or UTP (unshielded twisted pair) cable is recommended.
Firmware Version: 5.24
Communications Protocol: Sensorsoft Device Protocol Version 2.0.
Error control: 16 bit CRC (cyclic redundancy checking) for detection of communication errors between this device and host.
ST6105C (v5.00) Specifications (no longer shipping)
Measurement/Operating Temperature Range: -40 ºC to +60 ºC (-40 ºF to +140 ºF) with internal sensor (NIST traceable if ordered with certificate)
Precision: 0.5 ºC or 0.1 ºC
Accuracy: +/- 0.5 ºC over 0 ºC to +60 ºC range, +/- 1 ºC over remainder of temperature range
Humidity: < 90% RH (non-condensating)
Maximum measurement rate: one reading every second
Housing Dimensions: 8 cm (3.1") x 4 cm (1.6") x 2 cm (0.8")
Housing Material: injection molded ABS thermoplastic
Housing Colour: light gray
Sensor type: semiconductor
Communications cable: integrated 6 m (20 ft.) cable with DB-9F (female) mini D-SUB connector
Power source: Port-powered (RTS and or DTR, asserted).
Power supply current drain: 2 mA average, 6 mA maximum when port powered (5V RS232)
Communications Interface: RS232 using TX, RX, RTS, DTR and GND. One device per serial port.
Maximum extension cable length: 305 m (1000 ft.) using recommended cable type. Low capacitance STP (shielded twisted pair) cable or UTP (unshielded twisted pair) cable is recommended.
Firmware Version: 5.00
Communications Protocol: Sensorsoft Device Protocol Version 2.0.
Error control: 16 bit CRC (cyclic redundancy checking) for detection of communication errors between this device and host.
