Probe Temperature Measurement Range: -55 º C to +125 º C (-67 º F to +257 º F) (NIST traceable if ordered with certificate)
Precision: 0.5 º C or 0.1 º C (for Simple Text Command Interface only 0.5 º C)
Accuracy: +/- 0.5 º C over 0 º C to +70 º C, +/- 1 º C over remainder of temperature range
Electronic Housing Temperature Operating Range: 0 º C to +60 º C (32 º F to +140 º F) - available for -40 º C to +60 º C range on special order
Electronic Housing Humidity Operating Range: < 90 % RH (non-condensating)
Maximum measurement rate: one reading every second
Probe dimensions: 15.2 cm (6") long, 6 mm (1/4") diameter, stainless steel probe with 1.2 m (4 ft.) long, high-temp silicone rubber cable.
Housing Dimensions: 8 cm (3.1") x 4 cm (1.6") x 2 cm (0.8")
Housing Material: injection molded ABS thermoplastic
Housing Colour: light gray
Sensor type: semiconductor
Communications connector: 8 position modular jack (accepts 8 position RJ-45 plug)
Power source: External DC power connector
Power supply current drain: < 300 mA
External DC power connector: 2.1 mm power jack, center positive, reverse polarity and over-voltage protection
External power supply voltage: 5.0 - 9.0 VDC
Communication Interface: 10/100 Base-T Ethernet
IP Address: defined by customer (can be dynamic via DHCP or static, default is DHCP)
TCP Port Number: defined by customer (default is 3001). SS8002-SSH model default is 30001.
Firmware Version: 2.50
Communication Protocols: Simple Text Command Interface ("t" temperature, "m" model, "v" firmware version) or Sensorsoft Device Protocol (SSDP) Version 2.1. Support for SSH provided by model SS8002-SSH.
Error control: provide by TCP/IP protocol
